Hello everyone 
Couple a weeks ago i made my tutorial to make your PC running lightning fast with some steps and 2 programs i gave you.
Which you can find here http://mastergenius.net/wordpress/2010/01/23/make-your-pc-running-at-full-speed-with-a-few-easy-steps/
This time i will concentrate just on Windows 7, the latest Operating System from Microsoft and Yeap! the best one so far. Windows 7 is the best, the least buggy and the fastest of all the OSes around in my opinion but why not give it a little more special boost and have our system running at its full capability ??? 
(let’s clear something up, the previous tutorial i made is for all windows versions so for windows 7 too, some of the steps covered there are written here too just for completeness of this ultimate guide for Windows 7, and some of the steps here can be used in XP and Vista too)
Let’s Begin the biggest and more covering guide/tutorial on making Windows 7 faster than it already is!
Good Luck folks
- Open the MSconfig tool:
Start -> type in search box "msconfig.exe" without quotes and press ENTER
- Now click on the tab named Startup
- You can see now the applications that start when you open your PC. The more you have ticked, the more Apps will start, the more your PC will have slow boots.
- Just UNCHECK the Applications you don’t want to start
- Now that you filtered out the startup apps click Apply (don’t close msconfig since we are going to do some more work into it)
- We have been to Startup tab so far so it’s time to move on to the Boot tab
- Here you can change the timeout value on the right, i suggest something between 1-5 secs
- Now click Advanced Options
- Check the first box Number of Processors and in the dropdown box choose the number of CORES your Cpu has. (2 for dual cores etc)
- Now click OK and we are back to the Boot tab
- Check the box where it says “Make all boot settings permanent” and click OK
This is one of the main reasons why our PCs are slowing down A LOT. A good optimization of the services and you are going as fast as a rocket in space.
Start –> type “services.msc” without quotes in the search box and ENTER
- Now click the standard tab at the bottom
- Here you can see all services running on your system, some of them are automatic, others are manual and others are disabled. The point here is to have as less automatic as possible cause by being automatic they start when your PC goes on. So they slow it down making it a sluggish piece of machine!!! 
- Here i provide you a link to a site with information for each service and how it’s recommended to be, i used this guide for my PCs too.
http://www.blackviper.com/Windows_7/servicecfg.htm
Reading through this takes time and yeah it’s time consuming indeed. But as i said before SERVICES are one of the main reasons why PCs are slow so when you have time pay attention to this STEP 3.
- This step is my favourite cause by completing it you earn apart from speed improvement, hard disk space too. For completing this step i again recommend you a program like no other (Please try my recommendations, i spent a LOT LOT of time trying programs and these are really good), anw the program i recommend for this step is YourUninstaller PRO 2008. Not only it removes programs but also eliminates all traces they leave behind them.
- Download it by clicking the link above and install it with the keygen inside or if you are more ethical man buy the program.
- After doing this open the application, you will see all the programs installed on your system. By doing a strict choice for what you want, uninstall all the others by clicking uninstall on each one of them (finish one and then moe on to another).
- BE CAREFUL at this point, at first the uninstaller of the program will start as ususal, after finishing it DO NOT restart even if it’s suggests you to do. Finish the uninstall and then you’ll see that YourUninstallerPro goes a step ahead and searches for all the traces left behind, after finding them click next and it will clean them all.
- DO this for all the programs you do not need instead of the windows built in uninstaller cause this way all traces are deleted.
- YourUninstaller PRO has some nice tools if you search it but they are optional for anyone who is curious
Start -> type "sysdm.cpl" without quotes in the search box and hit ENTER
- Go to the Advanced tab
- Click the Performance Settings
- Now in Visual effects choose what you want and don’t want from the list. The less you have the more boost in performance you’ll notice. You can leave only the following on if you want for better user experience at minimum resources
- Now go the advanced tab and check the “Programs” in Adjust performance best for!
- OK and again OK to exit
Open Windows Explorer and go to Organize and then Folder and Search Options and choose the View tab
Now see the list and check the appropriates for your taste. I recommend having the following disabled though:
)Start -> type in the search box "mmsys.cpl" without quotes and hit ENTER
- Now click the Sounds tab
- Choose from the schemes list No Sounds or try to disable the ones you don’t want
- It’s important to turn off the sounds for “Windows logon“, “Windows logoff” and “Shutdown”
If you are the kind of user that just explores and gets the file he wants and do not use search regularly then you can disable the Search Indexing Service.
Start -> type "services.msc" without quotes into the search box and hit ENTER
- Now find the service called Windows Search
- Right click it and choose Properties.
- From the dropdown menu choose Disabled
- OK and exit
By disabling the service we can still do search normally but the system will not eat up memory indexing our searches. If you are using the search feature a lot then this might not be good to disable. Try it and see the difference yourself.
The Windows 7 Aero theme adds eyecandy features all around the system, shadows, transparency, and many other user interface tidbits. If you have a not-so-latest hardware and just want performance over graphic interface then you can disable the aero theme and you will notice a MAJOR boost in performance.
- Right click on Desktop and click Personalize
- Click the Window Color and uncheck the Enable Transparency and click Save Changes
- Now choose a theme from the basic ones and you will be fast like 100m dasher
Copy this into the adress bar of any of your explorer windows or go to it manually
Control Panel\All Control Panel Items\User Accounts
- Change User Account Control Settings
- Slide the bar far bottom to Never Notify and click OK
Now you won’t receive all those permission dialog boxes if you want to run the application etc.
- Click the START, then select Control Panel.
- Select Programs and Features.
- Select Turn Windows features on or off.
And check or uncheck the ones you want to have. Once finished click OK and wait for the windows to finish installing or uninstalling!
- Right Click on it and click Properties
- Uncheck the box where it says “Start sidebar when Windows Starts”
OK now there won’t be any side bar!
If you want even more performance you can disable your screen saver and your wallpaper. Just use a solid color as background if you are in an aged pc.
You can use my previous tutorial for detailed information on this topic but i will copy some parts here, Defragging, Cleaning junk files and registry are important tasks you should do every week if you ask me if not daily in order to help your system maintain its stability and performance.
First of all DOWNLOAD Auslogics Boost Speed 4
- When you open Auslogics you see the welcome page. I want you to click on Computer Clean Up from the left panel. Here there are 4 tools.
Disk Cleaner
Registry Cleaner
Uninstall Manager
Startup Manager
We will use the first 2 tools mainly cause the later 2 are already covered in the steps above.
- Run DiskCleaner and RegistryCleaner about once a week and you will always be ok. When you click on them there will be some choices for you to check. I check all the checkboxes although it says for some that is dangerous and didn’t have any problems so far, in contrary it’s better for best results.
- Now we go a little further, click on Optimization on the left panel and do the first 3 tools.
disk defragment
registry defragment
internet optimizer
it’s easy to complete them so no more details on this one.
- Information and Control is our last stop in Auslogics for now. Click on it and open the Tweak Manager. This is a manager that handles a lot of tweaks (REALLY HELPFUL AND USABLE) not easily found within windows. Discover this yourself and optimize it your way.
- The rest of the tools are optional for anyone to try them. Good they make bad they don’t
by me!!!This file contains some tweaks that will make your PC even faster and with some shortcuts too. Below are the tweaks detailed:
Right click the file above and choose Save Target As(I.Explorer) or Save Link As (M.Firefox)
When the download is finished run it and click OK when it asks for your permission.
Restart and see the results!!!
Fewww that was another one big tutorial for you If you follow my guide step by step i am sure you will be amazed at how fast your PC actually is. The most important points you need to have in your mind if you want the hard work you did now to last and have one super douper PC are:
Defragmenting Hard Drive
Removing Junk Files
Cleaning up Registry
Derfagmenting Registry
You can do these with Auslogics Boost Speed 4 i gave you above but there are other tools too if you don’t want to get my recommendation. The point is to do these things to be consistent.
Also for the non Windows 7 users many of these tricks can be done in XP and VISTA, try them and see yourself which one is good for your configuration!
Thank you all for reading my guide and i am looking forward your Comments with Your results.
There are times when everyone wants to open a command prompt when he navigates a folder but it’s kind of boring and time taking to open the command prompt and manually navigate to the folder he wants. Here i am going to show you how you can add a shortcut when you right click a folder in order to open that folder in command prompt or run a file in command prompt
This works for every Windows System (xp/vista/7)!!! But in Vista and 7 there is new trick you can use if you are afraid of changing registry values.
You can right click the folder you want to open in command prompt by having the SHIFT key pressed and you will have the option in the new menu. (SHIFT + Right Click the folder)
I Made two files with the registry keys for you if you don’t want to get smudged with regedit.
Download it and just run it.
Command Prompt Registry(directories) for Windows 98 and NT4.0 Systems
Command Prompt Registry(directories) for Windows 2000/ME/XP/VISTA/7
Now let’s say you want to open a file into the command Prompt and not a directory we can do the same trick but with other KEYS. Download the files below or do it manually with Regedit.
Download the .reg files below if you just want to import the shortcuts.!!!
Command Prompt Registry(files) for Windows 98 and NT4.0 Systems
Command Prompt Registry(files) for Windows 2000/ME/XP/VISTA/7
Nice tricks for anyone that uses command prompt a lot!
Hello everyone,
Today i am going to tell you how you can enable the language bar in your Windows PC. There times where the language bar disappears and we can not write in other than the system language. Or when for a reason we have it disabled and cannot enable it again. Here you can find out how easy it is to bring it up and type in what ever language you desire
Firstly some information about the process that is responsible for the language bar – CTFMON.EXE:
Ok, now that you know what this process is where do we find it and how can we bring it up ?
Go to "C:\Windows\System32" (where C: is your system drive)
Right Click on the “Ctfmon.exe” and select “Pin to Start Menu” or “Create a shortcut”. Now double click it to enable the language bar.
Now everytime you open your PC and the language bar is missing click your shortcut from start menu or wherever you put it.
For any questions or problems don’t hesitate to comment !!!
Thanks for reading 
Hello everyone ,
It’s been a long time since my last post but today i ‘m coming back with a lot of info. Is your PC running slow ? You want it to perform even better than the first day you got it ? No further search is required, you ‘ve found the right article to find out how you can do it.
What we will use:
1. Two applications i use which i strongly recommend to everyone, AuslogicsBoostSpeed 4 and YourUninstaller PRO 2008
2. No fear to play with your PC
3. I absolutely recommend Auslogics BoostSpeed 4 for this tutorial cause it’s really outstanding. I tested it on 5 PCs and believe me i’ve never seen such results. (i provide a link to the homepage of the application to buy it if you want but i i offer a cracked version too if you want to try it and then buy it)
We will take it step-by-step so everyone can follow. Let’s the Optimization start 
1) Filter the Startup Applications when you open the PC
- Download a program that can change which programs are starting on their own when your windows loads like Starter (Freeware) or the Auslogics BoostSpeed 4 (Shareware – Recommended).
- Now open the program and uncheck the ones that you do not want to open. The less the applications start the faster the boot will be. Softwares like MSN, Google, Picassa and everything that’s not needed by the system is recommended to be disabled. I even disabled bluetooth and camera assistant. You can enable them whenever you are going to use them through the start menu->all programs
- Now save your choices (on Starter) and close the application. You will see quite difference only by this but we are going a lot further.
2) Now we are going to make some changes into our MSCONFIG – system settings to optimize the PC a bit. I think everybody now use dual core cpus but i am quite sure it will have results for single cores too.
- Press START and then in winXP–>RUN and in VISTA click the search box at the bottom
- Now write either the RUN dialog box or the Vista search box the following: “msconfig”
- You will have a screen like this 
- Now click on BOOT next to GENERAL and in “timeout” value put something like 5 secs.
- Click the “Advanced Options” and in the cores box select the cores for you system and click ok.
- The 4 checkboxes in the BOOT tab must be all unchecked.
- The next tab Services is something we will discuss later so bookmark it. Now go to the StartUp tab and you can again see the programs that automatically start when you turn your PC on. You can change them from here too if you don’t want any of the applications recommended in Step 1 above.
- OH Something i forgot, BEFORE you click ok or anything, after you make the changes in the BOOT tab check the box Make all changes permanent so when you click the Ok or Apply button to be saved.
3) Ok we are done with step 2 too. Now we are going to edit the SERVICES running on our System. This is one of the main reasons why our PCs are slowing down A LOT. A good optimization of the services and you are going as fast as a rocket in space. You can use the services manager from the AUSLOGICS BOOSTSPEED 4 or from the built in service manager.
- Start –>RUN(XP) or SEARCH BOX(VISTA) –> and type in “services.msc”
- Now click the standard tab at the bottom
- Here you can see all services running on your system, some of them are automatic, others are manual and others are disabled. The point here is to have as less automatic as possible cause by being automatic they start when your PC goes on. So they slow it down making it a sluggish piece of machine!!!
- Here i provide you a link to a site with information for each service and how it’s recommended to be, i used this guide for my PCs too.
http://www.blackviper.com/WinXP/servicecfg.htm (for XP machines)
http://www.blackviper.com/WinVista/servicecfg.htm (for VISTA machines)
Reading through this takes time and yeah it’s time consuming indeed. But as i said before SERVICES are one of the main reasons why PCs are slow so when you have time pay attention to this STEP 3.
4) Now we are moving even further!!! Uninstalling All the uneccesary Applications.
- This step is my favourite cause by completing it you earn apart from speed improvement, hard disk space too. For completing this step i again recommend you a program like no other (Please try my recommendations, i spent a LOT LOT of time trying programs abd these are really good), anw the program i recommend for this step is YourUninstaller PRO 2008. Not only it removes programs but also eliminates all traces they leave behind them.
- Download it by clicking the link above and install it with the keygen inside.
- After doing this open the application, you will see all the programs installed on your system, By doing a strict choice for what you want uninstall all the others by clicking uninstall on each one of them.
- BE CAREFUL at this point, at first the uninstaller of the program will start as ususal, after finishing it DO NOT restart even if it’s suggests you to do. Finish the uninstall and then you’ll see that YourUninstallerPro goes a step ahead and searches for all the traces left behind, after finding them click next and it will clean them all.
- DO this for all the programs you do not need instead of the windows built in uninstaller cause this way all traces are deleted.
- YourUninstaller PRO has some nice tools if you search it but they are mandatory for anyone who is curious
5) We made it to step 5. Here we will use the Auslogics BoostSpeed 4 tools to make our PC . . . . PERFECTLY OPTIMIZED Yeah don’t laugh, all these steps are by me and there are nowhere else gothered all in one place. I am helping you at this cause a lot of people are having problems cause their PCs are slow and it’s because they don’t know how to use them.
- When you open Auslogics you see the welcome page. I want you to click on “Computer Clean Up” from the left panel. Here there are 4 tools.
Disk Cleaner
Registry Cleaner
Uninstall Manager
Startup Manager
We will use the first 2 tools mainly cause the later 2 are already covered in the steps above.
- Run DiskCleaner and RegistryCleaner about once a week and you will always be ok. When you click on them there will be some choices for you to check. I check all the checkboxes although it says for some that is dangerous and didn’t have any problems so far, in contrary it’s better for best results.
- Now we go a little further, click on “Optimization” on the left panel and do the first 3 tools.
disk defragment
registry defragment
internet optimizer
it’s easy to complete them so no more details on this one.
- “Information and Control” is our last stop in Auslogics for now. Click on it and open the Tweak Manager. This is a manager that handles a lot of tweaks (REALLY HELPFUL AND USABLE) not easily found within windows. Discover this yourself and optimize it your way.
- The rest of the tools are optional for anyone to try them. Good they make bad they don’t
6) Last step is some recommendations i have for you to follow!
- Install CCleaner and use it: it’s for removing junk and temp files from your registry and harddisk.
- Regularly check your system with an antivirus
- Once or twice a week open AUSLOGICS and run the cleaners we discussed above for consistency.
- DO NOT install any toolbars or advertised programs that make your PC REALLYYYYYYYY slow.
- You do not need to follow the steps as written, any order you take them will do the job but at the end do the 4 Auslogics cleaners and defraggers!!!
I hope you enjoyed my guide and had results. I am greatly sure that you WILL have at least 300% faster PC than before. I am waiting for your comments on how you found the guide and your results.
Thanks for reading and please forgive me for any bad english ;(
Hello my friends and Merry Christmas, wish you the best!
Today i am going to explain you how you can fix your master boot record (mbr) in your windows setup, either xp, vista or 7. When we have dual boot systems especially windows with linux or even windows versions and then you decide that you don’t want the either problems at your booting might come along when you delete the one you don’t want. We are here to Fix this issue now
Firstly starting with XP:
c:\WINDOWS>
c:\windows>fixmbr c:\windows>fixboot
Now let’s go over to Vista users:
Bootrec.exe /fixMBR Bootrec.exe /fixBoot
Now we move over to Windows 7 users:
cd d:\boot and press enter
if it doesn’t work try typing just D: and then if the command prompt change to D:\> type cd boot
bootsect /nt60 C: /force /mbr
Where C: is you can type two more keywords instead of that. Consider that C: is your system drive though. Ok the first one is the SYS (it will choose the partition that have the atrribute as system and fix that one) keyword and the second one is the ALL (it will fix all the partitions and disks). Also you can not use the /force and /mbr arguments but i think it’s better to do.
Ok everybody now you can fix your MasterBoot Record on your own
Ease of Access Keyboard Shortcuts |
The following table contains keyboard shortcuts that can help make your computer easier to use.
| Press this key | To do this |
|---|---|
| Right Shift for eight seconds | Turn Filter Keys on and off |
| Left Alt+Left Shift+PrtScn (or PrtScn) | Turn High Contrast on or off |
| Left Alt+Left Shift+Num Lock | Turn Mouse Keys on or off |
| Shift five times | Turn Sticky Keys on or off |
| Num Lock for five seconds | Turn Toggle Keys on or off |
Windows logo key  +U |
Open the Ease of Access Center |
It’s always a major pain in the ass when you check your printer queue and see a long list of items that never printed because something went wrong. Here is a quick and very easy trick to clean your printer queue, so when you’ve solved the problem, you won’t get all of those queued items.
1. Click Start.
2. Click All Programs->Accessories->Right-click Command Prompt->Run as Administrator
3. Type in net stop spooler and press ENTER
4. Type in del %systemroot%\System32\spool\printers\* /Q and press ENTER
6. Type in net start spooler and press ENTER.
Your printer queue should now be cleaned and ready to go.
Very useful trick indeed!!!
By default the TelNet client is not installed in Windows 7. You can install it by doing the following steps:
1. Click the START, then select Control Panel.
2. Select Programs and Features.
3. Select Turn Windows features on or off.
4. Check the Telnet Client checkbox.
5. Click OK.
6. A box will appear showing the installation process.
When it finishes running, the client is installed.
Thanks
Let’s say you need to work as administrator on your system without having to deal with the UAC, you can enable the built-in administrator account. This account is disabled by default, but can be enabled by following these instructions.
1. Click START
2. Click All Programs->Accessories->Right-click Command Prompt->Run as Administrator
3. When the UAC prompt appears, select Yes (if you have it enabled)
The Command window with the elevated command prompt will appear.
To enable the Windows 7 administrator account, execute the following at the command prompt:
net user administrator /active:yes
To disable the Window 7 administrator account, execute the following at the command prompt:
net user administrator /active:no
THANKS for reading my Tut
If you have a lot of applications set to launch at startup you will notice slow bootings and decreased performance. With this trick you will have the PC to boot first and then launch the applications.
1. Click START.
2. Go to the Search programs and files textbox and input regedit.
3. Select regedit.exe from the results.
4. When the UAC prompt appears, click the Yes button. (if you have UAC enabled)
5. In the left pane of the Registry Editor, go to (and select):
HLKM\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\PrefetchParameters
6. In the right pane, double-click EnablePrefetcher.
7. Change the value to 2 and click the OK button.
8. Double-click EnableSuperfetch.
9. Change the value to 2 and click the OK button.
10. Close the Registry Editor.
If you want to change the settings back to their default values, repeat the above steps, but change EnablePrefetcher and EnableSuperfetch to 3
Great tutorial again from MASTERGENIUS.NET